Top 5 Cat-Back Exhausts for the 1990-1997 Mazda MX5 Miata

 

If you're in the market for an aftermarket cat-back exhaust system for your 1990-1997 Mazda MX-5 Miata, there are a wide selection of options available to match your goals. Here are 5 cat-back exhaust systems that could give you the sound and performance that you're looking for! This article contains Affiliate links for which I may be compensated.

  1. Borla Cat-back Exhaust System: This cat-back exhaust is made from high-quality stainless steel and features a deep, aggressive sound. It's on the high end of price, but it's made by a reputable company and should have great sound and fitment.


  2. ISR Circuit Cat-Back Exhaust System: This cat-back exhaust is another option. It's made from high-quality stainless steel and features a louder more aggressive sound. It's designed to provide a performance boost and comes with all the necessary hardware for installation. This exhaust will be on the louder end of this list.


  3. DNA Motoring Cat-Back Exhaust System: The DNA Motoring cat back exhaust is on the cheaper end of the spectrum. It's made from stainless steel and features a free-flowing design, and will increase volume and reduce weight.


  4. Yonaka Cat-Back Exhaust System: The Yonaka cat-back exhaust is another high-quality option that's designed to provide a performance boost. It's made from stainless steel and features a free-flowing design, as well as a deep, aggressive sound. It's a 2.5" exhaust with a 3.5" tip.


  5. MagnaFlow Cat-Back Exhaust System: The Magnaflow cat-back exhaust is a popular option that's made from high-quality stainless steel. It's on the pricier end, but it's from a reputable company and has great reviews. 

When selecting an exhaust, be sure to do your research and read reviews to ensure that you're getting a product that matches your needs. You should also consider factors such as the sound level and performance boost that you're looking for, as well as the overall cost and any warranties or guarantees offered. Also, be sure that you're buying an exhaust specific to your year of car! Happy Miata-ing!

Comments

Post a Comment

Popular Posts

The BEST Exhausts for a 3.6L VR6 4-Motion Passat

Image
The 3.6L VR6 engine sounds great stock. But there are plenty of options to make it even better. This is a list of top picks for exhaust setups for the Volkswagen 3.6L VR6 4-Motion Passat, and the R36! This article contains Affiliate links for which I may be compensated. R36 Passat, Sourced from Wikipedia The first thing I'd recommend doing to get more tone and aggression out of your car is a simple middle suitcase resonator delete. This will make your car sound slightly louder and add a bit of popping and crackling. It won't blow your ears off or drone too much, and it is a great budget option. Listen below!   This is a job that can easily be done with a few simple tools. Here's a video showing everything you'd need to do a resonator delete on your own. If you want to pay someone to do it it'll likely cost $100-$150, which isn't bad for the added tone! If that isn't enough you can remove the rear mufflers in addition to the resonator. There aren't any s
Read more

Hood Vents Explained: What They Are, What They Do and Why We Use Them

Image
Hood vents are something often seen on high performance cars. The notably, the La Ferrari comes with them from the factory, as does the CTS-V, Mustang GT500, DB-11, and many, many more. But what is a hood vent, what does it do, and why do we use them? Today we’ll be going over just that. Let’s learn about hood vents together, and get right into it. To begin, let’s go over what a hood vent is. A hood vent is an aerodynamic device located in the hood that is designed to EXTRACT air from the engine bay. It’s openings are directed towards the rear of the vehicle. This is different than a hood SCOOP, which is designed to pull air into the engine bay. To sum this up, hood scoop’s openings face the front of the vehicle, and pull air in, hood vents face the rear, and help pull air out. But why would we want to pull air from the engine bay? Wouldn’t we want to force cold air into the engine bay to keep it cool? Perhaps force air into an intake? In some cases, yes, which i
Read more

How To Turbo a MX-5 Miata: The Complete Build List

Image
Want to turbo your Mazda MX5 Miata on a budget? This article will show you the exact setup that I used! This is the complete build list for 2Broke2Boosted, my budget turbo Miata build that I featured on my YouTube channel, CashedOutCars . This list contains ALL the main parts I used as well as where to buy them. Keep in mind that you will need all of these components to reliably turbo your car regardless of budget, so this is a great starting point for any build! This article contains Affiliate links for which I may be compensated. ECU The ECU is the brains of 2Broke2Boosted. This is how you will reliably and consistently control your car's fueling and ignition timing. I went with a Speeduino based SpeedyEFI kit for this, which comes complete with an Intake Air Temp (IAT) sensor, Throttle Position Sensor (TPS) and the harnesses to hook it up. This kit is $390 new, from SpeedyEFI’s site . Lots of people go with the more expensive Megasquirt line of ECUs, however the SpeedyEFI
Read more